Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Lab Tubing, Non-DEHP, 1/16""ID X 1/8""OD, 50 FT/Pk
E-3603 Non-DEHP Lab Tubing, 1/16" ID x 1/8" OD; 50 ft/Pk. Formulation: Tygon E-3603Applications: General laboratory, food and beverage, biopharmaceutical, analytical instruments.Characteristics: Non-DEHP, phthalate free. Long life, chemical resistant, nonoxidizing; able to bend to sharp radius curves and easily works with fittings. Transparent.Certifications: FDA compliant; meets USP Class VI and NSF 51 requirements.Temperature range: ¿51 to 165¿F (¿46 to 74¿C
AVANTOR MASTERFLEX (VWR LLC) C-Flex Tubing Braided; 1/2""id, 3/4""OD, 1/8"" Wall, 15'
Applications: For use with cell cultures, vessel and tank transfer, pump applications and cold storage. Characteristics: C-Flex formula 082, clear, animal derived component free (ADCF) resin and reinforced with polyester braid. Certifications: Complies with USP Class VI standards. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclavable and gamma sterilizable.
Chemglass Life Sciences FEP Tubing; 1/2" OD x 3/8" ID x 20ft Long
FEP Tubing; 1/2" OD x 3/8" ID x 20ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.
US Plastic Corporation 5/16" ID x 9/16" OD x 1/8" Wall Tygon S3 E-3603 Laboratory Tubing, 50ft
This tubing is ideal for general laboratory use, analytical instruments, peristaltic pumps, condensers, incubators, desiccators, as well as gas and drain lines. This tubing offers superior life and minimizes labor and the expense of replacement. It is non-oxidizing and non-contaminating, and less permeable than rubber tubing.
HARVARD BIOSCIENCE INC PE 90/10
Total order minimum requirement of $500. If only item on order, must order QTY of 9.PE 90/10
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Norprene, 3/8"" ID x 1/2"" OD; 50 ft
This tubing is ideal for chemical, heat, ozone, and ultraviolet (UV) light resistance applications. Characteristics include nonconductive, heat-sealable, nonaging, nonoxidizing, with superior acid and alkali resistance. They are manufactured according to GMP. Temperature range is -75 to 275¿F (-60 to 135¿C). Can be sterilized with autoclave.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, Similar to SC0451, Peroxide-Cured Silicone, 1.02 mm ID; 50 ft
NC1597444 MASTERFLEX SC0451 TUB 50/PK
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Precision Pump Tubing, Tygon Fuel & Lubricant F-4040-A, L/S 25; 50 ft
Applications: Fuels and industrial lubricants¿gasoline, kerosene, heating oils, cutting compounds, and glycol-based coolants Characteristics: Resists most hydrocarbons, embrittlement, and swelling; ozone- and UV-resistant, low extractability, thermoplastic, PVC-based material with plasticizer, firm (stiff) material, translucent yellow
Chemglass Life Sciences FEP Tubing; 1/4" OD x 1/8" ID x 20ft Long
FEP Tubing; 1/4" OD x 1/8" ID x 20ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0710"" ID x 0.0750"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Clear, 1/4"" ID x 3/8"" OD; 25 ft
Applications: Pharmaceutical, biotech, and general-purpose lab uses requiring high performance. Economical alternative to platinum silicone. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Product is manufactured in accordance with Part 820 Quality System Requirements (GMP); and meets USP Class VI. Temperature range: -40 to 275¿F (-40 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 3-Stop, Tygon LMT-55, 3.17 mm ID; 12/PK
The overall length of LMT-55 97619-series stop tubing is 16" (406 mm). The legacy Ismatec stop tubing was 400 mm long.
Order extension tubing under "Accessories". For technical assistance selecting tubing formulations and sizes, contact our Application Specialists.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon E-3603, Non-DEHP, 5/16"" ID x 7/16"" OD; 50 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.